ECOS - ECU Programming and DiagnosticThe RD3xx terminal is a multifunctional node of the DSS Integrated SIXTAU System, developed to realize portable and compact systems for test and diagnosis.
The terminal is fitted with a K/L and CAN bus interface, and communicates with Electronic Control Units (ECU) on board vehicles by means of a standard EOBD plug connection. The terminal can be programmed for carrying on test cycles in a completely autonomous mode.
Customers :Otherwise, if the RD3xx is connected to a SIXTAU Workstation, both printing and statistic capabilities are allowed. A unique Workstation can manage printing and statistic operations, by interfacing up to 15 RD3xx.
return
OPTIONS for RD3xx terminal
· Wireless network controller according
to IEEE 802.11 communication standard (standard for RD330/340).
· DSS network, in order to handle: analog acquisition, digital
I/O, custom I/O
· Workstation connection in order to handle: automatic test cycle
selection, remote test report printing
· Integrated laser scanner for barcode
reading (automatic detection of the most common types).
· Memory expansion: non volatile
RAM 4 Mbytes
· Special custom cables for non
standard connections
· Support Software (on Workstation)
for remote diagnosis, for statistical analysis and for parameters and
test programs download
In connection with the amperometric clamp the RC can perform the measurement of the voltage and the current of the car electrical system.
1
RD300
Multifunctional Portable Terminal 2
RD330 Multifunctional Portable Terminal 3
RD340 Multifunctional Portable Terminal 4
RC250
Amperometric clamp 5
Based Workstation
